For in-depth product & services help, ask our
Technical Information Scientists
Stock No: 018985
Protocol 9891: Separated PCR Assay - Dio2<tm1Vag>
Version 1.0
Notes
The genotyping protocol(s) presented here have been optimized for reagents and conditions used by The Jackson Laboratory (JAX).
To genotype animals, JAX recommends researchers validate the assay independently upon receipt of animals into their facility.
Reaction cycling temperature and times may require additional optimization based on the specific genotyping reagents used.
Expected Results
Mutant = ~300 bp
Heterozygote = ~300 bp and 462 bp
Wild type = 462 bp
JAX Protocol
Protocol Primers
| Primer | 5' Label | Sequence 5' → 3' | 3' Label | Primer Type | Reaction | Note |
|---|---|---|---|---|---|---|
| 11181 | ATT TGT CAC GTC CTG CAC GAC G | Mutant Reverse | ||||
| 16215 | CCA TCC TTT ATA TTG CCT GAC A | Common | ||||
| 16216 | CCT CAT CAA TGT ATA CCA ACA GGA | Wild type Reverse |
Reaction A
| Component | Final Concentration |
|---|---|
| ddH2O | |
| Kapa 2G HS buffer | 1.00 |
| MgCl2 | 2.00 |
| dNTPS-kapa | 0.20 |
| Primer 1 | 0.50 |
| Primer 2 | 0.50 |
| 10x Loading Dye | 0.50 |
| Kapa 2G HS taq polym | 0.01 |
| DNA |
Cycling
| Step | Temp °C | Time | Note |
|---|---|---|---|
| 1 | 94.0 | -- | |
| 2 | 94.0 | -- | |
| 3 | 65.0 | -- | -0.5 C per cycle decrease |
| 4 | 68.0 | -- | |
| 5 | -- | repeat steps 2-4 for 10 cycles | |
| 6 | 94.0 | -- | |
| 7 | 60.0 | -- | |
| 8 | 72.0 | -- | |
| 9 | -- | repeat steps 6-8 for 28 cycles | |
| 10 | 72.0 | -- | |
| 11 | 10.0 | -- | hold |
JAX uses a very high speed Taq (~1000 bp/sec), use cycling times recommended for your reagents.
Reaction B
| Component | Final Concentration |
|---|---|
| ddH2O | |
| Kapa 2G HS buffer | 1.00 |
| MgCl2 | 2.00 |
| dNTPS-kapa | 0.20 |
| Primer 3 | 0.50 |
| Primer 4 | 0.50 |
| 10x Loading Dye | 0.50 |
| Kapa 2G HS taq polym | 0.01 |
| DNA |
Cycling
| Step | Temp °C | Time | Note |
|---|---|---|---|
| 1 | 94.0 | -- | |
| 2 | 94.0 | -- | |
| 3 | 65.0 | -- | -0.5 C per cycle decrease |
| 4 | 68.0 | -- | |
| 5 | -- | repeat steps 2-4 for 10 cycles | |
| 6 | 94.0 | -- | |
| 7 | 60.0 | -- | |
| 8 | 72.0 | -- | |
| 9 | -- | repeat steps 6-8 for 28 cycles | |
| 10 | 72.0 | -- | |
| 11 | 10.0 | -- | hold |
JAX uses a very high speed Taq (~1000 bp/sec), use cycling times recommended for your reagents.