For in-depth product & services help, ask our
Technical Information Scientists
Stock No: 025195
Protocol 26623: Standard PCR Assay - Tg(Vmn1r191-Mapt/CFP)1Dlc
Version 1.2
Notes
This assay will NOT distinguish hemizygous from homozygous transgenic animals.
The genotyping protocol(s) presented here have been optimized for reagents and conditions used by The Jackson Laboratory (JAX).
To genotype animals, JAX recommends researchers validate the assay independently upon receipt of animals into their facility.
Reaction cycling temperature and times may require additional optimization based on the specific genotyping reagents used.
Expected Results
Transgene = ~325 bp
Internal positive control = 415 bp
USE 1/4 vol IPC and 2X vol Tg primers
JAX Protocol
Protocol Primers
| Primer | 5' Label | Sequence 5' → 3' | 3' Label | Primer Type | Reaction | Note |
|---|---|---|---|---|---|---|
| 13007 | ACA CCG GCC TTA TTC CAA G | Transgene Reverse | A | IRES | ||
| 20506 | CCT CCT GAG CTG AGA GTT GC | Transgene Forward | A | Vmn1r191 | ||
| 21238 | CTG TCC CTG TAT GCC TCT GG | Internal Positive Control Forward | A | |||
| 21239 | AGA TGG AGA AAG GAC TAG GCT ACA | Internal Positive Control Reverse | A |
Reaction A
| Component | Final Concentration |
|---|---|
| ddH2O | |
| Kapa 2G HS buffer | 1.30 X |
| MgCl2 | 2.60 mM |
| dNTP KAPA | 0.26 mM |
| 13007 | 0.50 uM |
| 20506 | 0.50 uM |
| 21238 | 0.50 uM |
| 21239 | 0.50 uM |
| Glycerol | 6.50 % |
| Dye | 1.00 X |
| Kapa 2G HS taq polym | 0.03 U/ul |
| DNA |
Cycling
| Step | Temp °C | Time | Note |
|---|---|---|---|
| 1 | 94.0 | -- | |
| 2 | 94.0 | -- | |
| 3 | 65.0 | -- | -0.5 C per cycle decrease |
| 4 | 68.0 | -- | |
| 5 | -- | repeat steps 2-4 for 10 cycles (Touchdown) | |
| 6 | 94.0 | -- | |
| 7 | 60.0 | -- | |
| 8 | 72.0 | -- | |
| 9 | -- | repeat steps 6-8 for 28 cycles | |
| 10 | 72.0 | -- | |
| 11 | 10.0 | -- | hold |
JAX uses a very high speed Taq (~1000 bp/sec), use cycling times recommended for your reagents.
JAX uses a 'touchdown' cycling protocol and therefore has not calculated the optimal annealing temperature for each set of primers.